Cooper Menvier TS690ID Manual de usuario descargar pdf (Pagina 4)

WEBWAYONE LTD, Unit 11 Kingfisher Court

Hambridge Road, Newbury, Berkshire. RG14 5SJ

00 44 1635 231 514 support@webwayone.co.uk

WebWayOne – Galaxy Integration Brief

There are a number of variations in the electrical connectivity to a Honeywell Galaxy Panel from the WebWay SPT. These

may depend on the Galaxy Model (e.g. Pre Galaxy G3 models do not have an RS232 Interface).

1. RS232 Emulating an Internal RS232 module (Galaxy G3 and onwards).

2. RS485 connection emulating an Ethernet module (All post Galaxy 16+ models utilising Galaxy S/W V4.0

onwards, G2 panels running Galaxy S/W V1.40 onwards).

3. RS485 connection emulating an External Telecoms module (All models running V1.4 or higher).

4. DCM phone line (Digi) connection emulating a modem as a Telecoms module

5. Hardwired Pin Inputs to the WebWay

When connecting to the data bus of a Galaxy using either RS232 or R485 there are several points to consider.

Integration

RS485

 Full SIA alarms

 Remote Upload/Download

 Remote Servicing (automated)

 Line Fault Monitoring driven by the Galaxy

settings

 An SPT re-boot will generate a Missing

Com + Key alarm – manager/engineer

reset to clear. The bus is monitored 5

times/second.

RS232

 Full SIA alarms

 Remote Upload/Download

 WebWay Remote Maintenance will not cause

disruption when the SPT reboots

 Outputs are required to indicate Line

Fault (Relay required).

 Only G3 and Dimension panels have

an internal 232 module by default

 Automated Remote servicing is not

possible

RS232 is used as a default setting unless Automated Remote Servicing is required.

1 2 3 4 5 6 7 8 9 ... 39 40

Sin comentarios

Cooper Menvier TS690ID Manual de usuario Pagina 4