Cooper Menvier TS690ID Manual de usuario descargar pdf (Pagina 30)

WEBWAYONE LTD, Unit 11 Kingfisher Court

Hambridge Road, Newbury, Berkshire. RG14 5SJ

00 44 1635 231 514 support@webwayone.co.uk

Risco Alarm panels

ProSys 40, ProSys 128

Applications supported

SIA alarm transmission

Remote upload/download via WebWay ATS and WebWay Remote Manager

Physical connection details

Select Dip switch 10 to ON (bottom left corner of the PCB) for a Terminated RS485 connection

Connect the A, B, and gnd terminals of the WebWayOne to connector J1 on the ProSys alarm panel. Use either the

WebWay provided cable or make to suit.

The connection details are as follows:

Bus 2 WebWayOne 2424

YEL A

GRN B

COM RTN

Connect the WebWay PWR + and - to any relevant Power and Ground terminals.

WebWayOne configuration

Environment variable settings

PANEL_TYPE = RISCO

Button menu 9, option L

Panel configuration

The following configuration stages have to be completed to add the WebWayOne to the panel.

1) Adding the ACM Module

2) Set up the ACM Module

3) Set up the Communication Path IP Addresses and Port numbers

4) Set up Account Numbers

5) Set up Alarm Format

6) Ensure Upload/Download Communication is not encrypted

7) Enable Upload/Download

8) Disable Callback on Upload/Download

9) Enable Upload/Download through GSM

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Sin comentarios

Cooper Menvier TS690ID Manual de usuario Pagina 30