Cooper Menvier TS690ID Manual de usuario descargar pdf (Pagina 21)

WEBWAYONE LTD, Unit 11 Kingfisher Court

Hambridge Road, Newbury, Berkshire. RG14 5SJ

00 44 1635 231 514 support@webwayone.co.uk

Mk 3 SPT Serial Number 54- or 55-xxxxxx-1

Note: Jumpers should be set to RS232

WebWay SPT

9 way Connector colours

Yellow

Black

GND

Green

Red – Any +12V Terminal at Alarm Panel

Mk 4 SPT Serial Number 56-xxxxxx-1

WebWay SPT

9 way Connector colours

232 T

Yellow

232 R

Black

RTN

Green

Red – Any +12V Terminal at Alarm Panel

Items to Check

Menu 13 – Check that a module has been selected, either 0=SMO or 1=SM1, alternatively Dialler has been selected. If

not set Menu’s 11 & 12 will not be accessable.

SPT – Make sure the parameter GUARDALL_PANEL_TIMEOUT has not been programmed, if it has, remove any values

associated.

Check the fuse on the Serial Module is operational.

If you have configured the panel for a DCM connection and despite the panel set up being correct, the panel is not dialling

out; reboot the panel.

If the GSR is not present in Menu 12; then it should appear in Menu 20.

Guardall alarm panel configuration for all ranges

Select menu 11 telephone number 1

Select Tel Number <1>

Enter Tel Number <01234 567890> (any valid phone number is acceptable)

Select Module <SM 0> This is valid for those panels which include an integrated module. For the external

modules on the legacy range you will need SM 1.

Select Assist <Off>

Select Format <Guardall>

Select Auto Test <Off>

Select Attempt <3>

Select Backup <0>

Select Call Repeat <Off>

Select GSR <1>

Select Alarm <On>

Select Set/Unset <On>

Select Bypass <On>

Select Trouble <On>

Select Log On <On>

Select Eng On <On>

Select Reset <On>

Select Restore <On>

Press X button twice

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comentarios a estos manuales

Sin comentarios

Cooper Menvier TS690ID Manual de usuario Pagina 21

Comentarios a estos manuales