Cooper Menvier TS690ID Manual de usuario descargar pdf (Pagina 37)

WEBWAYONE LTD, Unit 11 Kingfisher Court

Hambridge Road, Newbury, Berkshire. RG14 5SJ

00 44 1635 231 514 support@webwayone.co.uk

TEXECOM Premier alarm panel connections and configuration

88/168/640

The panel software version must be 6.x or above.

Connect the WebWay panel interface (TTL) R, T and RTN using the supplied molex cable. This goes T- red R-Green

RTN-Blue and it plugs onto Com port 1.

Connect the WebWay PWR + and - to any relevant Power and Ground terminals.

The texecom panel configuration is uploaded via the Wintex software and downloaded to the panel on com port 2 from a

local PC.

The only thing to configure in the panel is enabling upload/download if required

Key settings in the communications menu are:

In Options:

Enable communicator must be ticked

UDL passcode (set in the panel) must match.

Dial attempts 1, ring before answer 3

In ARC’s:

Account number (site ID)

SIA Level 2/3

Connect Via IP - ticked

Send SIA text - ticked

In Radio-Pad and Com Port options:

Com Port 1 – WebWayOne module

Local IP address 127.0.0.1

Local IP port 50561

Gateway 127.0.0.1

Subnet Mask 255.255.255.0

Name/SMG port 50561

Back to panel list

1 2 ... 32 33 34 35 36 37 38 39 40

Sin comentarios

Cooper Menvier TS690ID Manual de usuario Pagina 37